| |
| 
HRS 8 AM TO 5:30 PM M-F PACIFIC TIME
|  |
|
PILOT-POLE |
 |         | | The Industry Standard for Pilot Car Height Poles | 58 inches * to 21 feet **
in seconds!
*Length without tip section. **Total height includes distance from ground. *After initial setup You set it up standing up,
not laid on the ground! |  | Available in All White or YELLOW with BLACK Twist-Locks | 
| All standard Pilot-Pole and Pro-Pak are shipped USPS Mail.
Choice of either Parcel Post or Priority.
UPS shipping is optional.Most orders are filled within 4 days. |  | This equipment is built to cover a wide range of applications. Since every vehicle is different, not every installation will be easy.
These products require expertise in the automotive, mechanical and/or electrical disciplines for proper installation. |
|
| We'll post examples to this Photo Album of how a
Pilot-Pole
can be mounted on
various vehicles.
Many of these will be custom jobs
done in our shop.
Send in your photos to be
included here.
| |
|
|
The Pilot-Pole is an advancement
in height pole design.Lightweight and easy to use. Stores in a 58 inch space. So strong and durable because its made of a fiberglass composite material It has linear fiberglass matting and is circular wound with additional fiberglass strands. UV inhibitors are added to prevent degradation of the pole when exposed to the elements. Each section of the pole is wrapped with two layers of the highest quality Nexus® veil which prevents fiber bloom (slivers in your hand), and preserves the integrity of the surface. The pole has nesting sections that fit inside of each other, and draw out to any desired height. Each section has "stop markers" to prevent extending the pole too far. The 5 extendable base sections range from 2 inches in diameter to 1 inch in diameter. The sections are secured into place by turning the "Twist-Lock" grips that are securely pressed onto the pole. Each Twist-Lock has an additional stainless steel fastener to prevent it from coming loose. Each section has a Stainless-Steel T-Bolt Clamp with a finger-knob for additional securement. The Pilot-Pole is non conductive, non destructive, and does not have any of the electrical hazards commonly associated with metal poles. Standard top section is 3/8 inch fiberglass rod and has durable polyurethane bristles to take the impact of low bridges and wires. Pilot-Pole comes pre calibrated in feet and inches for quick deployment. Many different steel mounting tubes are available to fit your application. Pilot-Pole meets all DOT and Professional Pilot Car requirements.
|
 | Built on Wonderpole ® Technology | Layer One
Longitudinal Strands | Layer Two
Circumferential Wrap | | Layer Three Longitudinal Strands | Layer Four
Continuous Strand Mat | Layers Five and Six
2 plys of
Highest Quality Nexus® Veil | 6-ply Laminate Lay Up
Engineered Composite |
| Beware of Imitations that
use cheap imported poles that attempt to look the same. Common "Painter Poles" also use a cheaper fiberglass tube that does not have multiple layers. Pilot-Pole uses the best available pole and accessory parts to create our product. | We have more experience building
Height Poles than anyone, that's why
so many trust our product. |
|
 | STREET SWEEPER BRISTLES . . . | These make an impact zone that really stands up to abuse.
They give a nice 'whap!' when striking an obstacle.
The hit gets progressively harder as it gets closer to the red band where it registers a solid hit, same as a hard-top rod. | Bristle-Top rods are preferred by the
majority of our customers. |
|
 | STANDARD WHITE TOP RODS | 3/8 fiberglass rods are very flexible, yet spring back straight after a hit. Long lasting and economical to replace. |
|
 | BRIGHT YELLOW TOP RODS | These new YELLOW RODS really stand out and are
included standard with all yellow Pilot-Poles. |
|
| | |
 | FOR ADDED SECURITY | Stainless 'T-bolt' clamps with custom made finger knob for extra security to maintain height setting on rough roads! NOW STANDARD on ALL 4 of the the telescoping sections. Great for the ladies who can't get the locking collars as tight. Operates easily without tools. |
|
 |
| PRE-CALIBRATED | Pilot-Pole is marked for feet and inches in a way that makes deployment quick and easy. After the initial set-up, just add feet and inches to the collapsed height. No laying it on the ground and using a tape measure each time. Calibration marks are recessed into the pole and now use automotive lacquer for durability. |
|
 | Eliminate the need for wraps of tape! | Aluminized steel mounting tubes are
expanded on the top end and a
2" ID plastic insert
holds Pilot-Pole snugly. |
|
|
 | | FEATURE | Barney's
Pilot-Pole | US Pilot Car
Height Pole | | Website | http://pilotpole.com | http://uspilotcar.com | | Pole Origin | CANADA-USA | USA | | Composition | Fiberglass | Fiberglass | | Non-Conductive | YES | Yes | | Tube Construction | 6 Layer Cross Hatched
Continuous Filaments
Smooth Vellum Outer | Chopped Fiber | | Colors | White, Yellow, Orange
Green, Blue | Yellow | | Joints | Compression Fittings
and T-Bolt Clamps | Pinned Transitions | | Short Length | 58" /72" | 60" | | Max Height | 21', 24', /27' | 21' | | Calibrated | YES | NO | | Stingers | 3/8 Fiberglass Rod | Non-Flexible Rod
with rubber spring | | Stinger Top | 6" Street-Sweeper
Bristles or Hardtop | Solid Rod | | Replacement Parts | ALL | ALL | | Mounting Tubes | 10 Styles | 2 Styles | | Installations | YES | NO | | Number in Use | 3500+ | Less than 500 | | Accessory Mirror | YES | YES |
|
| |  |
Just the Pilot-Pole Professional Height Pole
with 4 White or Yellow Top Rods
*plus shipping
|
Get the Pilot-Pole and a Mounting Tube,
now comes with 6 rods and 2 adaptors! Pilot-Pole composite height pole. White or Yellow/Black 2 Solid Rod Adaptors and 4 Bristle-Tip Rods
and 2 Hard Top Rods White or Yellow Rods 4 Stainless 'T-bolt' clamps with finger knobs. Your choice of Mounting Tube: Any tube shown below.
 *plus shipping   
|
|
 | MT-DPL Mounting Tube Details. Plate configuration is either a 'b' or a 'd' when looking down from the top. Mounts to many common Brush Guards
(Spacers may be required) |
|
|  | Do loads up
to 24 or 27 Ft? Get Our
Extension Tube
to get up to
36 or 50 inches
more height. Powder coated
all welded
aluminized steel
with plastic sleeve
in top for snug
pole fit. Includes pins.
36": $50
50": $62 |
|
|
| Height Pole Suction Cup Mirror Kit |
|
|
|
| |
