The Pilot-Pole is an advancement
in height pole design.Lightweight and easy to use. Stores in a 58 inch space. So strong and durable because its made of a fiberglass composite material It has linear fiberglass matting and is circular wound with additional fiberglass strands. UV inhibitors are added to prevent degradation of the pole when exposed to the elements. Each section of the pole is wrapped with two layers of the highest quality Nexus® veil which prevents fiber bloom (slivers in your hand), and preserves the integrity of the surface. The pole has nesting sections that fit inside of each other, and draw out to any desired height. Each section has "stop markers" to prevent extending the pole too far. The 5 extendable base sections range from 2 inches in diameter to 1 inch in diameter. The sections are secured into place by turning the "Twist-Lock" grips that are securely pressed onto the pole. -
Each section has an
additional Stainless-Steel T-Bolt Clamp with a finger-knob for
additional securement. The Pilot-Pole is non conductive, non destructive, and does not have any of the electrical hazards commonly associated with metal poles. Standard top section is 3/8 inch fiberglass rod and has durable polyurethane bristles to take the impact of low bridges and wires. Pilot-Pole comes pre calibrated in feet and inches for quick deployment.
Many different steel mounting tubes are available to fit your application. Pilot-Pole meets all DOT and Professional Pilot Car requirements.
|
 | Built on Wonderpole ® Technology | Layer One
Longitudinal Strands | Layer Two
Circumferential Wrap | | Layer Three Longitudinal Strands | Layer Four
Continuous Strand Mat | Layers Five and Six
2 plys of
Highest Quality Nexus® Veil | 6-ply Laminate Lay Up
Engineered Composite |
| Beware of Imitations that
use cheap imported poles that attempt to look the same. Common "Painter Poles" also use a cheaper fiberglass tube that does not have multiple layers. Pilot-Pole uses the best available pole and accessory parts to create our product. | We have more experience building
Height Poles than anyone, that's why
so many trust our product. |
|
 |
STREET SWEEPER BRISTLES . . . |
These make an impact zone that really stands up to abuse.
They give a nice 'whap!' when striking an obstacle.
The hit gets progressively harder as it gets closer to the
red band where it registers a solid hit, same as a hard-top
rod. |
Bristle-Top rods are preferred by the
majority of our
customers. |
|
 |
STANDARD WHITE TOP RODS | |
3/8 fiberglass rods are very
flexible, yet spring back straight after a hit. Long lasting
and economical to replace. |
|
 | BRIGHT YELLOW TOP RODS | These new YELLOW RODS really
stand out and are
included standard with all yellow Pilot-Poles. |
|
| | |
 | FOR ADDED SECURITY | Stainless 'T-bolt' clamps with custom made finger knob for extra security to maintain height setting on rough roads! NOW STANDARD on
ALL 4 of the the telescoping sections. Great for the ladies who can't get the locking collars as tight. Operates easily without tools. |
|
 |
| PRE-CALIBRATED | Pilot-Pole is marked for feet and inches in a way that makes deployment quick and easy. After the initial set-up, just add feet and inches to the collapsed height. No laying it on the ground and using a tape measure each time. Calibration marks are recessed into the pole and now use automotive lacquer for durability. |
|
 | Eliminate the need for wraps of tape! | Aluminized steel mounting tubes are
expanded on the top end and a
2" ID plastic insert
holds Pilot-Pole snugly. |
|
 | | FEATURE | Barney's
Pilot-Pole | 1st Pilot Car
Height Pole | US Pilot Car
Height Pole | | Website | http://pilotpole.com | http://heightpoles.com/ | http://uspilotcar.com | | Pole Origin | CANADA-USA | CHINA | USA | | Composition | Fiberglass | Fiberglass | Fiberglass | | Non-Conductive | YES | YES | Yes | | Tube Construction | 6 Layer Cross Hatched
Continuous Filaments
Smooth Vellum Outer | Chopped Fiber | Chopped Fiber | | Colors | White, Yellow, Orange
Green, Blue | Cream White | Yellow | | Joints | Compression Fittings
and T-Bolt Clamps | Compression Fittings
and T-bolt Clamps | Pinned Transitions | | Short Length | 58" /72" | 58" | 60" | | Max Height | 21', 24', /27' | 21' | 21' | | Calibrated | YES | NO | NO | | Stingers | 3/8 Fiberglass Rod | 3/8 Fiberglass Rod
CB Antenna w/spring | Non-Flexible Rod
with rubber spring | | Stinger Top | 6" Street-Sweeper
Bristles or Hardtop | 8" Plastic
Strands | Solid Rod | | Replacement Parts | ALL | Stingers | ALL | | Mounting Tubes | 10 Styles | 1 Style | 2 Styles | | Installations | YES | NO | NO | | Number in Use |
3500+ | Less than 400 | Less than
500 | | Accessory Mirror | YES | NO | YES |
|
| |  |
